Brass Male-Female Adapter Chrome

This is a Brass Male-Female Adapter (Threaded Union) specifically designed for hot and cold water connection systems (residential, industrial, and agricultural). Unlike a simple nut, this product has two active ends and acts as a direct connector between two pipes, valves, or fittings.

Product Structure:

One end: Male thread (external) – screws into a pipe, valve, or female fitting.

Other end: Female thread (internal) – accepts a pipe, valve, or male fitting.

Middle section: Hexagonal shape for easy tightening with a wrench.

Available Sizes (based on total length/height):

Size (Length) Recommended Application
2.5 cm Suitable for narrow spaces, small pipes, and delicate fittings (e.g., under-sink connections).
3 cm Standard size for most household water pipes (bathroom, kitchen, toilet).
5 cm Suitable for thick pipes, water pumps, industrial applications, and higher pressure systems.
Main Applications (Water Systems):

Connecting two water pipes together (no welding or glue required).

Connecting water pipes to valves (single-way, double-way, elbows, tees).

Repairing or replacing damaged fittings in building water supply systems.

Creating an adapter between parts with different thread sizes or types.

Key Features for Water Use:

✅ Male-Female design: Quick and secure connection without complex tools.

✅ High-quality Brass material: Resistant to rust, corrosion, and water scale.

✅ Standard BSP thread: Compatible with most water pipes and fittings in the market.

✅ Pressure resistant: Suitable for city water pressure and household pumps.

✅ Teflon tape compatible: Prevents water leakage and dripping.

✅ Long lifespan: Withstands constant moisture, hot and cold water temperatures.

Important Note for Buyers:

“This product is a Male-Female Adapter (Threaded Union) . Before purchasing, please measure the thread size of your pipes or fittings. If the male or female thread does not match your existing parts, the connection will not work properly. If you are unsure, please contact us.”

Installation Guide:

1.Wrap Teflon tape around the male thread (external side).

2.Hand-tighten the adapter into your pipe or female fitting.

3.Use a wrench on the hexagonal middle section to tighten firmly (do not over-tighten to avoid thread damage).

4.The female side is now ready to accept a male pipe or fitting.